Mobotix T24 Informazioni Techniche Scaricare il pdf (Pagina 70)

70/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.4.2 Delete PIN

You need the red admin card as well as the PIN itself to erase a previously set-up access PIN.

Proceed As Follows:

1. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

2. Hold your admin card up to the keypad buttons until you hear a beep and the

OK/MENU button lights up blue continuously.

3. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

4. Enter Erase Mode: Press the ESC/ALARM button until you hear the second beep

(button lights up blue).

5. Enter access PIN: Enter the access PIN to be erased and brieﬂy press the blue key

button (the button’s ﬂashing pattern will change). Re-enter the PIN for conﬁrmation

and again press the blue key button brieﬂy, which then lights up blue continuously.

6. The access PIN has now been erased from the system and, if required, another

PIN can be set up afresh. You are now back in conﬁguration mode (the OK/MENU

button lights up blue). Press the ESC/ALARM button to exit. After 60 seconds, the

mode is exited automatically.

hold (2nd beep)

ESC

hold (2nd beep)

0 9

Access PIN

ESC

0 9

Access PIN

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 119 120

Nessun commento

Mobotix T24 Informazioni Techniche Pagina 70