Mobotix T24 Informazioni Techniche Scaricare il pdf (Pagina 27)

27/118

Step 1: Performing Auto-Conﬁguration

www.mobotix.com • [email protected]

2.1.4 Functional Test Part 1

Once all the Grandstream videophones to be used have been detected in the network

and integrated via the auto-conﬁguration process, you should carry out a four-stage

functional test.

1. Check The Start Display Of The Videophones

The T24 is the SIP server and has VoIP proﬁles for all the Grandstream videophones detected

in the network. The videophones are assigned a sequential quick dial number beginning

with *101 (*101, *102, *103 and so on). The new quick dial number and IP address of the

telephone are shown on the left side of the display.

The system time supplied by the T24 is shown on the right side of the display. This system

time is valid for all the videophones and door stations. The T24 is normally factory-set to

CET (Central European Time). Otherwise, you can manually set the time zone, time and

date on the keypad (see Section 2.2.4).

The menu language of both the videophone and the time and date are factory-set to

English. You can change the language on the Grandstream menu (Menu > Personalize >

Language > Select Language). :

Menu > Personalize > Language > Select Language

Menu > Personalize >

Language > Select

Language

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 119 120

Nessun commento

Mobotix T24 Informazioni Techniche Pagina 27