Mobotix T24 Informazioni Techniche Scaricare il pdf (Pagina 56)

56/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.2 Individual Conﬁguration Of Access Media

As described in the extended application scenario in Section 1.2, the MOBOTIX transponder

cards can also be set up with individually-selected personal, transponder or contact numbers.

On the following pages, you will ﬁnd out how to do this and how to manage cards and

PINs directly via the keypad.

3.2.1 Personal, Transponder And Contact Numbers

The system automatically assigns every new card a sequential personal and transponder

number during a quick card setup. The (ﬁrst) red admin card is assigned personal number

0 and transponder number 0. The ﬁrst blue user card is assigned personal number 1 and

transponder number 1. The second blue user card is assigned personal number 2 and

transponder number 2, etc.

When setting up the cards, you can also allocate these numbers individually. Any number

of user cards can share the same personal number, but only one transponder number

can be assigned to each door station or keypad.

Personal Number

With an individually-selected personal number, you can set up multiple transponder or an

additional access PIN for a single user. Additionally, you can erase all the access media

connected to a personal number from the system at once (“Erase user from system“).

Transponder Number

With the transponder number, you can erase a card without having it be physically present

(theft, loss).

Contact Number

A contact number works like a telephone number that is entered on the keypad to contact

speciﬁc users or user groups in the building. Only the remote station(s) of the selected

user(s) will ring, and/or their voice mailbox will be accessed. For user cards, you can set

up up to 16 dierent contact numbers.

Note

Should you want to assign new individual numbers to a user card that has already

been set up previously, for example, when initially starting up a system, ﬁrst erase the

card as described in Section 3.3.2 and the proceed as described in 3.3.1.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 119 120

Nessun commento

Mobotix T24 Informazioni Techniche Pagina 56