Mobotix T24 Informazioni Techniche Scaricare il pdf (Pagina 60)

60/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.3.2 Erase User Card

If you no longer require a previously set-up blue user card, if the card is no longer

available (loss, theft), or if you want to set up the card afresh with individual numbers,

e.g., for a dierent user or voice mailbox, you should erase the card.

To do so, you will need the red admin card (or Super PIN) and the transponder number of

the user card to be erased, if you no longer have the card itself. If you still have the card,

you can erase it by holding it up to the keypad without requiring a transponder number.

Proceed As Follows:

1. Ready the admin card and the user card to be erased or its transponder number.

2. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

3. Hold your admin card up to the keypad’s buttons (or enter the Super PIN and

then press the OK/MENU button) until you hear a beep and the OK/MENU button

continuously lights up blue.

4. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

5. Enter Erase Mode: Press the ESC/ALARM button until you hear the second beep

(button lights up blue). You can now erase the user card (step 6), or if you do not

have the card, use its transponder number to erase it (step 7).

hold (2nd beep)

ESC

hold (2nd beep)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 119 120

Nessun commento

Mobotix T24 Informazioni Techniche Pagina 60