Mobotix T24 Informazioni Techniche Scaricare il pdf (Pagina 66)

66/118

T24 System Manual Part 2: Access Conﬁguration On The Keypad

www.mobotix.com • [email protected]

3.3.5 Erase Admin Card

If you no longer require a previously set-up red admin card, or if the card is no longer

available (loss, theft), you should erase the card for security reasons.

To do so, you will need one previously set-up admin card (or Super PIN) and the transponder

number of the admin card to be erased, if you no longer have another admin card. If

you still have the card, you can erase it by holding it up to the keypad without requiring

a transponder number.

Proceed As Follows:

1. Ready the set-up admin card and the admin card to be erased or its transponder

number and the Super PIN.

2. Enter Conﬁguration Mode: Press the OK/MENU button until you hear the second

beep (button ﬂashes blue).

3. Hold a red admin card not to be erased up to the keypad buttons (or enter the

Super PIN and then press the OK/MENU button, if there is no remaining admin

card) until you hear a beep and the OK/MENU button continuously lights up blue.

4. Enter Access Conﬁguration Mode: Brieﬂy press the blue key button, which then

lights up blue.

5. Enter Erase Mode: Press the ESC/ALARM button until you hear the second beep

(button lights up blue). You can now erase the admin card at hand (step 6), or if

you no longer have the admin card, use its transponder number to erase it (step7).

6. Erase current admin card: Hold the card to be erased up to the keypad until you

hear the ﬁrst beep (the ESC/ALARM button lights up red) and pull the card away

again. Next, conﬁrm the card by again holding it up to the keypad until you hear

a beep.

hold (2nd beep)

ESC

hold (2nd beep)

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 119 120

Nessun commento

Mobotix T24 Informazioni Techniche Pagina 66