Mobotix T24 Informazioni Techniche Scaricare il pdf (Pagina 36)

36/118

T24 System Manual Part 2: System Startup Without A PC

www.mobotix.com • [email protected]

2.2.4 Set Time Zone, Time And Date

The videophone display shows the current system time. If this

is incorrect, you can manually set the time, date and time zone

on the keypad.

You must ﬁrst set the correct time zone* on the keypad to enable

the switch from daylight saving time to standard time to take

place automatically.

Afterwards, date and time should be adjusted.

After you have completed these time settings,continue with Section 2.3 (Set Up The

Videophone), if you have not done so already.

Set Time Zone Code:

For this, you need the three-digit code for your time zone. Please refer to the list of time

zone codes at the end of this manual. The list is also available as a PDF document from

the MOBOTIX website (www.mobotix.com > Support > Operating Manuals).

1. Switching on conﬁguration mode: Press the OK/MENU button until you hear the

second beep (button ﬂashes blue).

2. Hold your admin card up to the keypad buttons until the OK/MENU button lights

up blue continuously.

3. Switching on Time Zone mode: Press 9 until you hear the second beep and it

ﬂashes (reminder: The letter “z“ on the button stands for “zone“).

4. Now enter the three-digit time zone code for the location to which you are

closest (for example, 452 for Europe/London). Conﬁrm your entry by pressing the

OK/MENU button.

5. The respective number buttons on the keypad light up to show the time zone

that you have set.

* Factory setting: GMT +

1 hour (Berlin, Germany)

hold (2nd beep)

0 9

Time Code

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 119 120

Nessun commento

Mobotix T24 Informazioni Techniche Pagina 36